Carburetor "Turkey Pan"
Do a preliminary connect of the carburetor linkage. You may need to switch the side of the lever that the rear pivot attaches to. Ocassionally, we need to enlarge the hole in the "pan" too.
Carburetor "Turkey Pan" |
|
| The "turkey pan" is installed directly
on the intake manifold (with gasket). If you use an
insulator, put it between the pan and the carburetor base. Do a preliminary connect of the carburetor linkage. You may need to switch the side of the lever that the rear pivot attaches to. Ocassionally, we need to enlarge the hole in the "pan" too. |
|