Oil Pressure Line Conversion (S/W only)

For certain combinations (tight clearance behind dash and/or heat problems in the engine compartment), you can change the plastic line from the gage to the oil tap on the block.  This conversion only works with Stewart Warner gages. ( The fitting on the Smith gage is BSP.)

Adapter: 1/4 MPT x 1/8 FPT

Tube adapter (compression): 1/8" tube x 1/8 FPT

Tube adapter (compression): 1/8" tube x 1/8 MPT

Hose for covering exposed copper tubing: 4 mm ID

McMaster Carr 9162K221

McMaster Carr 5220K31

McMaster Carr 5220K61

Where available