Emergency Flasher Wiring
With aftermarket conversion
With ERA-built add-on
289 Slabside, FIA and early 427 (coming)Late 427 (PDF File)
Emergency Flasher Wiring |
With aftermarket conversion |
This diagram shows a typical aftermarket
flasher connected into the ERA wiring harness. You may use
the clamp-type piggyback connectors usually supplied with the switch
instead of the terminals shown. The wire going to the dash
light dimmer switch is required by some states. It flashes
the dash lighting when the emergency flashers are working.With ERA-built add-on289 Slabside, FIA and early 427 (coming)Late 427 (PDF File) |