WHEEL OFFSETS

The wheel offsets below are applicable to both pin-drive and bolt-on wheels.  If your wheel width is different from what is shown, interpolate the backspacing.

Some pin-drive wheels may require  a 1" spacer between the pin-drive hub adapter and the hub.  Basic pin-drive hub dimensions for machining the centers of pin drive wheels is available here.  Wheel center depths to fit the hubs are here.
FRONT
front wheels with standard front body
front wheels with 1075 flares
Bolt-on wheel backspacing is the same as pin-drive
R
E
A
R		Rear wheels with narrow body

Note that a spacer is available to move the wheel out by 1".  It's sometimes used with the 1075 flares.  Add 1" to the backspacing if the spacer is used.

Not illustrated: 13" wide - requires 4.95" backspacing (5.95" with spacer).

Rear wheels with 1075 body